1967-72 f100 parting out

Private parties only. No eBay/Craigslist listings.

Moderator: FORDification

Post Reply
Txvet
New Member
New Member
Posts: 3
Joined: Mon Mar 26, 2018 9:07 pm

Re: 1967-72 f100 parting out

Post by Txvet »

I was wondering if you had some west coast mirrors? The 3 point mounting
QSA United
New Member
New Member
Posts: 25
Joined: Tue Mar 29, 2016 9:42 pm
Location: Los Angeles, California
Contact:

Re: 1967-72 f100 parting out

Post by QSA United »

59yblockf100 wrote:i have a few 67-72 f100s and older trucks i am parting out,i have alot of parts,if you need something let me no,i will be adding parts as i get them off,thanks
Still have the trucks?
Keep on rockin' FORDward!
59yblockf100
New Member
New Member
Posts: 234
Joined: Fri Aug 19, 2016 4:45 pm

Re: 1967-72 f100 parting out

Post by 59yblockf100 »

yes i have some parts left,
User avatar
sideoilerfe
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 804
Joined: Tue Sep 11, 2007 10:04 pm
Location: Oregon, Portland

Re: 1967-72 f100 parting out

Post by sideoilerfe »

Looking for a 64-70 3 spoke Steering Wheel. Do you have one?
Side oiler FE, see if you can catch me!!!

1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
59yblockf100
New Member
New Member
Posts: 234
Joined: Fri Aug 19, 2016 4:45 pm

Re: 1967-72 f100 parting out

Post by 59yblockf100 »

will have to check and see what i have,this weekend,thanks
70reef
New Member
New Member
Posts: 23
Joined: Sat Sep 24, 2016 9:35 am

Re: 1967-72 f100 parting out

Post by 70reef »

I need the door striker pin that screws into door jam thanks, bob
nicadocius22
New Member
New Member
Posts: 2
Joined: Sat Jun 16, 2018 11:31 pm

Re: 1967-72 f100 parting out

Post by nicadocius22 »

Hey. Looking for headlight bezels for 67-69. Don't need to be cherry, they will be painted. Possibly a lower valance too. And maybe 2 f250 dog dish hub caps. Thanks man, Nick
59yblockf100
New Member
New Member
Posts: 234
Joined: Fri Aug 19, 2016 4:45 pm

Re: 1967-72 f100 parting out

Post by 59yblockf100 »

no headlight bezels,do have 68 lower valance,headliner trim,dip rao; trim,headliner trim,custon cab emblems ect all in fair condition
mrmtbaldy
New Member
New Member
Posts: 6
Joined: Wed Oct 14, 2009 8:25 pm

Re: 1967-72 f100 parting out

Post by mrmtbaldy »

I'm looking for the rubber end of a factory ac or heater duct hose where it mates with the vent holes in the dash. Most times the rubber pieces are glued or stapled to the end of the duct hose, so I would take a full hose or just the rubber piece. Let me know if you have any of these lying around. Thanks!

Dan
bkoonce88
New Member
New Member
Posts: 4
Joined: Mon Jul 23, 2018 2:10 pm

Re: 1967-72 f100 parting out

Post by bkoonce88 »

I am looking for a good hood for a 1970 f110 Custom. Do you have?? I am in SE Texas.
59yblockf100
New Member
New Member
Posts: 234
Joined: Fri Aug 19, 2016 4:45 pm

Re: 1967-72 f100 parting out

Post by 59yblockf100 »

yes i do,but its in ca,
User avatar
urchinhead
New Member
New Member
Posts: 75
Joined: Sun Feb 08, 2015 12:11 pm
Location: San Francisco, Ca

Re: 1967-72 f100 parting out

Post by urchinhead »

I am looking for the bracket that bolts to the power steering box, and holds the brake lines in place. It has two bolts that attach to the steering box.

I am also looking for a nice 360/390 “Power by Ford,” valve cover that is not dented up.

Please let me know.
1970 F100 Custom 2WD, SWB, 360 FE, np435
1964 Galaxie 500 Convertible, 390, Cruise-o-Matic
http://i171.photobucket.com/albums/u309 ... fa6562.jpg
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

Re: 1967-72 f100 parting out

Post by Ron_Hall »

urchinhead wrote:I am looking for the bracket that bolts to the power steering box, and holds the brake lines in place. It has two bolts that attach to the steering box.

I am also looking for a nice 360/390 “Power by Ford,” valve cover that is not dented up.

Please let me know.
If he doesn't have the bracket, I do.

Ron
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
59yblockf100
New Member
New Member
Posts: 234
Joined: Fri Aug 19, 2016 4:45 pm

Re: 1967-72 f100 parting out

Post by 59yblockf100 »

urchinhead i do have the valve covers,need cleaning and paint,can send you pictures if you pm me your email address,i dont have the bracket,ron hall sent you a pm on the drip rail trim,didnt hear back from you,
59yblockf100
New Member
New Member
Posts: 234
Joined: Fri Aug 19, 2016 4:45 pm

Re: 1967-72 f100 parting out

Post by 59yblockf100 »

urchinhead i do have the valve covers,need cleaning and paint,can send you pictures if you pm me your email address,i dont have the bracket,ron hall sent you a pm on the drip rail trim,didnt hear back from you,
Post Reply