SBF swap parts needed, also carb

Moderator: FORDification

Post Reply
mjhaltom
Preferred User
Preferred User
Posts: 400
Joined: Thu Aug 03, 2006 7:24 am
Location: Georgia, Elberton

SBF swap parts needed, also carb

Post by mjhaltom »

I have sold the hot rod 390 I built several years ago out of my 71 F100. It was a lot of fun, but not very practical. I want to return my F100 to daily driver condition so I bought a 80000 mile 302 out of a 81 Mercury Grand Marquis granny car. I need the SBF engine towers (power steering equipped if that matters on these), a flywheel, a motorcraft 2 barrel carb (rebuildable core ok) and maybe some more stuff. Anyone near Northeast GA have those or be willing to ship to me? Forever grateful, Mark
2012 Chevrolet Silverado 2wd 4.8 ls auto
2002 Toyota Sequoia 2wd 4.7 auto
1985 GMC 3/4 ton 2wd 350 automatic
1979 Chevrolet C10 350/TH400 14 bolt "Big 10" (DD)
1971 F100 2WD LWB 302 T18 3.70 9inch PS PB
1970 VW Type III squareback cut into pickup dual carbs
1967 Ford F100 LWB 352 3.03 9inch
1967 International Travellall Panel truck
1966 International Scout 800 4X4
1964 Chevrolet C10 on 1986 4X4 frame 350 700r4
1958 Chevrolet DelRay 235 3 speed
1954 GMC rat rod project Scout frame, inline 6, T90 4X4
1953 Chevrolet Tin Woody
1946 Hudson BigBoy Pickup-ratrod project
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: SBF swap parts needed, also carb

Post by basketcase0302 »

Sold my last 2150 a few weeks ago, (had several of them). Your doing the same swap I did and I was so...happy when I did mine (who wouldn't be thrilled to get 14 MPG city o=in one of our trucks)!
I do have a lot more parts for sale close to you:
http://www.fordification.com/forum/view ... 11&t=82828
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
jbeaver
New Member
New Member
Posts: 52
Joined: Fri Oct 15, 2010 5:06 am
Location: Georgia, Buford

Re: SBF swap parts needed, also carb

Post by jbeaver »

I don't know if this is a direction you want to go but I have a new in the box Edelbrock 500 cfm carb and a new fuel pump that should "fit the bill". I don't need to make any money on these so I'd sell them to you for what I paid if your still interested?
mjhaltom
Preferred User
Preferred User
Posts: 400
Joined: Thu Aug 03, 2006 7:24 am
Location: Georgia, Elberton

Re: SBF swap parts needed, also carb

Post by mjhaltom »

Thanks for the replies guys. Im sorry I haven't checked the boards lately. I've decided to use my 600 Holley so now I need an intake for my 302, engine towers for my bumpside for the 302 and the bellhousing and flywheel required. Any help?
2012 Chevrolet Silverado 2wd 4.8 ls auto
2002 Toyota Sequoia 2wd 4.7 auto
1985 GMC 3/4 ton 2wd 350 automatic
1979 Chevrolet C10 350/TH400 14 bolt "Big 10" (DD)
1971 F100 2WD LWB 302 T18 3.70 9inch PS PB
1970 VW Type III squareback cut into pickup dual carbs
1967 Ford F100 LWB 352 3.03 9inch
1967 International Travellall Panel truck
1966 International Scout 800 4X4
1964 Chevrolet C10 on 1986 4X4 frame 350 700r4
1958 Chevrolet DelRay 235 3 speed
1954 GMC rat rod project Scout frame, inline 6, T90 4X4
1953 Chevrolet Tin Woody
1946 Hudson BigBoy Pickup-ratrod project
Post Reply