steering shaft

Moderator: FORDification

Post Reply
OldRanger68
New Member
New Member
Posts: 9
Joined: Mon Feb 13, 2017 9:36 pm

steering shaft

Post by OldRanger68 »

F100/250 - 4x2 -factory P/S, '67 - '68 steering shaft & flange - 34 15/16" long - flange has (1) 1 1/2" slot & (1) 3/4" slot part # C9TZ-3524M

above information from the FORDification part numbers page.
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: steering shaft

Post by basketcase0302 »

OldRanger68 » Thu Feb 16, 2017 1:22 pm
F100/250 - 4x2 -factory P/S, '67 - '68 steering shaft & flange - 34 15/16" long - flange has (1) 1 1/2" slot & (1) 3/4" slot part # C9TZ-3524M
above information from the FORDification part numbers page.
Like "pulling hen's teeth"... :(

I'd expand your search to the entire column and hope for the best.
Or...I DIDN'T SAY THIS KEITH :lol:
Go over to the "dark site" and see if numbers dummy can find it for you.

Now where's that fte sucks smile when I need it... :cuss:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
Post Reply