Need help with trim

No tech discussion, please

Moderator: FORDification

Post Reply
cboswell
New Member
New Member
Posts: 3
Joined: Fri Mar 31, 2017 10:29 am

Need help with trim

Post by cboswell »

Hey guys I am new here and new to restoring. I bought a 72 ford ranger XLT. The wood grain trim was in bad shape and I ordered the 3M di-noc to replace the old. The FORD lettering is inside the tailgate panel and I need to remove them to lay the vinyl down. I can't for the life of me figure out how to get the letters off. I don't want to damage the panel because they look hard to replace and expensive. Thanks for any help.
Charlie
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: Need help with trim

Post by sargentrs »

The tailgate panel is held on with rivets through the back side of the tailgate. I believe there are 10 of them. There's a photo in the top of the this thread that will show you about where they are. http://m.fordification.com/forum/viewtopic.php?t=40047
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
cboswell
New Member
New Member
Posts: 3
Joined: Fri Mar 31, 2017 10:29 am

Re: Need help with trim

Post by cboswell »

I got it now. Thanks for the reply.
Post Reply