Compression test question

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
User avatar
wildcard
Blue Oval Guru
Blue Oval Guru
Posts: 1045
Joined: Sun Dec 04, 2005 5:40 pm
Location: Texas

Compression test question

Post by wildcard »

I want to do a compression test on my 300 I-6.
I've looked at a few different sites, including this one, and can't seem to find a definite answer. I would like to know if the test is done with all the plugs removed or just the one I'm testing. Or does it even matter?
Thanks.
Benny
User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1882
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

Re: Compression test question

Post by colnago »

I did mine with the plugs in. Logically, it should not matter, since you're looking at the change between cylinders. I had 100 - 120 for all cylinders (with plugs in), except for 1 and 3, which were noticeably lower (30 - 60). If I do it again, it will be with plugs in.

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
Ohiotinkerer
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 852
Joined: Wed Nov 09, 2016 5:49 pm
Location: Galion, Ohio

Re: Compression test question

Post by Ohiotinkerer »

I've always done them it the plugs in which I learned from my dad and grandpa which is how they always did it.......never had anyone tell me any different so I'm guessing that's the way to do it........just my :2cents: ......
"Life is a garden - dig it"........... :thup:

1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
Busboy
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 943
Joined: Sat Jan 24, 2015 9:51 am
Location: Nampa Idaho

Re: Compression test question

Post by Busboy »

You want to do it with all the plugs removed in order to maximize engine cranking speed. Also the throttle should be blocked wide open.
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
User avatar
MadJoe
New Member
New Member
Posts: 159
Joined: Mon Dec 05, 2016 3:47 pm
Location: North East Massachusetts

Re: Compression test question

Post by MadJoe »

I'm with the "plugs out" crowd. If for no other reason than to make cranking easier on the battery. Plugs out reduces the effort necessary to get the full 5 rotations to get a reliable check, so by the time you're checking the last 2 cylinders your battery isn't noticeably weaker - which can affect your readings. You're going to take them all out eventually, so why not just start with them all out?

-Joe
1971 F-350 DRW SWB Stake Body
360 FE
C6 transmission
OEM disc brakes
OEM power steering
Dana 70 4.10 rear end
Lee
New Member
New Member
Posts: 215
Joined: Sat Nov 27, 2004 10:04 am
Location: Lacey, Washington

Re: Compression test question

Post by Lee »

Plugs out, throttle open.
User avatar
Jacksdad
Blue Oval Fan
Blue Oval Fan
Posts: 579
Joined: Sat Mar 30, 2013 8:52 pm
Location: San Diego, CA

Re: Compression test question

Post by Jacksdad »

Lee wrote:Plugs out, throttle open.
The way I've always done it :thup:
1971 DRW F350 cab and chassis with an Open Road motorhome conversion, Dana 70, 352 (originally 390)/C6, PS, power front discs, and 159" w/b.
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: Compression test question

Post by Ranchero50 »

Plugs out, never noticed a difference with the throttle opened so I stopped doing it. 5-6 pulses to get max pressure. Write it down so I don't forget.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
User avatar
tqwrench
New Member
New Member
Posts: 155
Joined: Wed Jun 11, 2014 12:06 am
Location: Ypsilanti, MI

Re: Compression test question

Post by tqwrench »

Spark plugs out, throttle blocked wide open, power to coil disconnected - you don't want errant spark flying around. The first two puffs should be within 90% of max from that hole and there shouldn't be any hole less than 80% of max compression.

Another way to put it, you should do 5 "puffs" per hole, those first two should come up fast and be close to the last 3. It might go like this 80-100-105-105-110. If it slowly climbs, you might have a problem. I'd cringe if I saw 50-70-90-100-110. Then, the max compression from each hole should be within 80% of the others, so if your top compression reading was 140, you shouldn't have anything under 112.

The question is, if you come up with low compression, what next? Are you prepared to do cylinder leak down testing? Are you chasing a symptom?
1969 F-250 390 Camper Special
Candy Apple Red/Wimbledon White
Post Reply