FE valve cover grommets

Engine Forum Archives

Moderator: Ranchero50

Post Reply
User avatar
Comet
Preferred User
Preferred User
Posts: 447
Joined: Fri Oct 15, 2004 9:42 pm
Location: Washington, Seattle

FE valve cover grommets

Post by Comet »

My 390 needs grommets for the pcv on the valve cover. I bought a set from Mac's but they are the wrong king and they do not list any others for the FEs. The one they have is way too small and does not have the type of fitting to fit around the twist and lock metal stamping. Anyone know where I can find these new?
That's MR. Jackass to you fellah!
User avatar
DuckRyder
Moderator
Moderator
Posts: 4893
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:

re: FE valve cover grommets

Post by DuckRyder »

http://mansfieldmustang.com/EnginePCV.html

Should be: RUBBER GROMMET, valve cover to PCV valve (p/n C7AZ-6A892-A)

These guys supply most of the mustang joints too, so you should be able to pick it up from NPD or Mustangs Unlimited.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
User avatar
Comet
Preferred User
Preferred User
Posts: 447
Joined: Fri Oct 15, 2004 9:42 pm
Location: Washington, Seattle

re: FE valve cover grommets

Post by Comet »

Duckryder, that is the same part no. I bought, but it is not large enough dia. and the surface are between the inner and outer dia. is like 3/16" too narrow.
That's MR. Jackass to you fellah!
User avatar
DuckRyder
Moderator
Moderator
Posts: 4893
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:

re: FE valve cover grommets

Post by DuckRyder »

:hmm:

Try Mustangs Unlimited part no: F2143

http://www.mustangsunlimited.com/keywor ... &x=17&y=15
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
User avatar
Comet
Preferred User
Preferred User
Posts: 447
Joined: Fri Oct 15, 2004 9:42 pm
Location: Washington, Seattle

re: FE valve cover grommets

Post by Comet »

Thanks! BTW, their search engine sucks! It didn't find the part, but I got it after a very dumbed down search (grommet). Part no. is F2143 01
Thanks again. I'll go re-measure the hole and order it if it fits.
That's MR. Jackass to you fellah!
Post Reply