'67 F100 w/3.03: shift rod bushings @ trans? (not @ column)

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
xanthias
New Member
New Member
Posts: 15
Joined: Sat Jan 07, 2017 4:04 pm

'67 F100 w/3.03: shift rod bushings @ trans? (not @ column)

Post by xanthias »

I'm all set on my shift selector lever bushings for my 3 on the tree. But my searches are coming up empty for these bushings where the shift rods attach to the transmission gear selector levers on the left side of the truck (link to pics):

https://1drv.ms/i/s!AviebioptyTxomfX8Kbmdh8n4Gku
https://1drv.ms/i/s!AviebioptyTxomgxvWpbLNqqx_aw

Can anyone point me in the right direction?
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: '67 F100 w/3.03: shift rod bushings @ trans? (not @ column)

Post by sargentrs »

Unless I'm mistaken it's the same as the ones on the column levers http://dennis-carpenter.com/m/product.a ... 5TZ-7343-A The replacements are a struggle to install and I had to "tweak" mine to get them in.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
xanthias
New Member
New Member
Posts: 15
Joined: Sat Jan 07, 2017 4:04 pm

Re: '67 F100 w/3.03: shift rod bushings @ trans? (not @ column)

Post by xanthias »

Thanks Randy. I'll run that down and report back. I have a set but D.C. describes them as for the column. Which, there's also a plastic set for the column too.
xanthias
New Member
New Member
Posts: 15
Joined: Sat Jan 07, 2017 4:04 pm

Re: '67 F100 w/3.03: shift rod bushings @ trans? (not @ column)

Post by xanthias »

Post Reply