King Pin Reaming Clearance

Suspension, steering, brakes, wheels & tires

Moderator: FORDification

Post Reply
dtcohen
New Member
New Member
Posts: 96
Joined: Mon Aug 07, 2017 11:09 am

King Pin Reaming Clearance

Post by dtcohen »

I am planning on taking my spindles to a machine shop to have the king pin bushings reamed. What should the clearance be between the bushing and the kingpin? I have read everything from .0005" to .003" to "ream until you can just push the pin through by hand.
Busboy
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 943
Joined: Sat Jan 24, 2015 9:51 am
Location: Nampa Idaho

Re: King Pin Reaming Clearance

Post by Busboy »

I've installed and reamed kingpin bushings for decades and have never measured them for clearance. You just slowly creep up on it til the pin just slides in smoothly. Not rocket surgery. :D
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
Post Reply