1979 to 1972 f-250 parts swap,scavenging

4x4 & Off-road Forum Archives

Moderator: Doug Comer

User avatar
averagef250
100% FORDified!
100% FORDified!
Posts: 4387
Joined: Fri Mar 17, 2006 12:58 am
Location: Oregon, Beavercreek

Postby averagef250 » Tue Aug 07, 2007 1:29 pm

The hood may fit, but is very wrong.

The '79 has a mated tranny and t-case. You can run it if you run the 79 front axle.
1970 F-250 4x4 original Willock swivel frame chassis '93 5.9 Cummins/Getrag/NP205/HP60/D70

User avatar
FORDification
Site & Forum Admin
Site & Forum Admin
Posts: 8037
Joined: Sun Jul 11, 2004 12:52 am
Location: Nebraska, West Point
Contact:

re: 1979 to 1972 f-250 parts swap,scavenging

Postby FORDification » Tue Aug 07, 2007 6:40 pm

The hood won't work unless you also use the dentside radiator support and hood latch. On our bumpsides, the latch is on the hood and the catch is on the radiator support, but on the dentsides the latch is on the radiator support and the catch is in the hood.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
ImageImageImage
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!

ima71 trucks are older
New Member
New Member
Posts: 142
Joined: Tue Jul 10, 2007 10:39 pm
Location: Washington (the dry part of the state)

Postby ima71 trucks are older » Wed Aug 08, 2007 5:10 pm

The 79 has a married transfercase.

Take all of the 78-79 power steering setup. its an easy swap and a lot better design then the '77.5-down
68 F100 soon to be on an 80's 4x4 frame and 300-4spd
69 F100 300-4spd
78 F150 300-3spdOD


Return to “Archives”

Who is online

Users browsing this forum: No registered users