Closed knuckle leak "fix"

4x4 & Off-road Forum Archives

Moderator: Doug Comer

Post Reply
User avatar
fomocoguy
100% FORDified!
100% FORDified!
Posts: 1548
Joined: Mon Nov 12, 2007 10:04 pm
Location: St. Louis, MO

Closed knuckle leak "fix"

Post by fomocoguy »

I just thought I'd share with you all the way I decided to fix my leaky closed knuckle front dana 44. I grew tired of wondering if all my gear oil had leaked out or not, and after unsuccessfully trying to purchase new seals and wipers I decided to go a different route. A few people have told me that they just pack theirs with axle grease, but I didn't want to have to disassemble it all every time I wanted to grease it. So I went to the auto parts store and picked up some universal grease fittings. Then I picked up a 1/4-28 tap and drill set and went to work on the sight plugs. Here is what I came up with:
Image
Image

After reinstalling the plugs I pulled the drain bolt out (one of the lower ball joint bolts) to release air and drain what was left in there, which wasn't much, and pumped a full tube of grease into each side. I never did get any to come out of the drain hole, so I may go have the local lube joint pump it in until it comes out the drain. Anyways, just thought I'd share my idea with you all. Now I can stop worrying about it! :D
Joe

1971 F100 flareside 8ft
1964 Chrysler New Yorker Town and Country wagon
2006 Dodge Ram 2500 cummins
2005 Ford Ranger
User avatar
Wes
Blue Oval Fan
Blue Oval Fan
Posts: 732
Joined: Fri Oct 21, 2005 6:04 pm
Location: California, Southern& Lake Havasu Az

Re: Closed knuckle leak "fix"

Post by Wes »

thats a great maintenance up grade, be sure you get lube in the upper king pin bearing. I got my high boy becuase the right upper king bearing was wiped out and PO couldn't deal w/ it.
Wes

http://www.fordification.com/galleries/ ... ?cat=10402
67 F250 High boy
69 Bronco

If you can't see fit to stand behind Our Troops...Please stand in front of them :)
User avatar
fomocoguy
100% FORDified!
100% FORDified!
Posts: 1548
Joined: Mon Nov 12, 2007 10:04 pm
Location: St. Louis, MO

Re: Closed knuckle leak "fix"

Post by fomocoguy »

Thanks for the tip! I think I'm gonna go to the Home Depot and buy that air powered grease gun I've been eyeballin' so I can pump it full a little easier. I've wanting it for a looong time... :thup:
Joe

1971 F100 flareside 8ft
1964 Chrysler New Yorker Town and Country wagon
2006 Dodge Ram 2500 cummins
2005 Ford Ranger
Post Reply