Dana 44HP headers

4x4 & Off-road Forum Archives

Moderator: Doug Comer

User avatar
Doug Comer
Blue Oval Fan
Blue Oval Fan
Posts: 650
Joined: Tue Dec 13, 2005 12:38 am
Location: California, Sonora

Dana 44HP headers

Postby Doug Comer » Mon Jun 15, 2009 12:21 pm

My cousin is fixing up his 68 highboy. I've been helping ALOT. He picked up a set of headers form a 74 f-100 4x4. This truck has a high pinion front axle. We are in the process of rolling a 78 dana 44 high pinion under his truck. He wanted me to ask you guys if these headers will fit. I'm kinda on the fence on this one. :hmm: Thanks for your input. Doug
1967 f100 4x4
1970 f250 4x4

User avatar
CO684X4
New Member
New Member
Posts: 227
Joined: Sun Oct 21, 2007 11:17 pm
Location: Colo Spgs, CO

Re: Dana 44HP headers

Postby CO684X4 » Mon Jun 15, 2009 7:36 pm

Shouldnt be a problem a HP dana 44 is a HP dana 44 if it fit in the 74 should work fine in the 68.

User avatar
Thunderfoot
100% FORDified!
100% FORDified!
Posts: 2209
Joined: Tue Apr 17, 2007 2:34 pm
Location: Idaho, Boise

Re: Dana 44HP headers

Postby Thunderfoot » Tue Jun 16, 2009 11:13 am

I'm curious to see how this works out just from the standpoint of the headers were for an F100 4x4 and you are putting them on an F250 4x4... When looking at headers for my Highboy they showed different part numbers between models and they are constructed different :dk: if they will work because of that... but the High Pinion part shouldn't make any difference as the headers aren't close to the center section anyway and the axle tube are still in the same place. :2cents:
Shayne
I'm not "Brand Loyal" Ford-Chevy-Dodge-Toyota I have them all, one even cross mixed...
If it Looks good and Works good then it's ok by me. Everything has its issues from time to time...

69 SWB (project) & 69 Highboy (driver/project)
http://s197.photobucket.com/albums/aa29 ... d%20truck/
http://www.fordification.com/galleries/ ... ?cat=10399

User avatar
Doug Comer
Blue Oval Fan
Blue Oval Fan
Posts: 650
Joined: Tue Dec 13, 2005 12:38 am
Location: California, Sonora

Re: Dana 44HP headers

Postby Doug Comer » Wed Jun 17, 2009 4:34 pm

The problem I ran into was the collectors hit the driveline on the HP. Thats why I had to run blockhuggers. :?
Doug
1967 f100 4x4
1970 f250 4x4

User avatar
Doug Comer
Blue Oval Fan
Blue Oval Fan
Posts: 650
Joined: Tue Dec 13, 2005 12:38 am
Location: California, Sonora

Re: Dana 44HP headers

Postby Doug Comer » Tue Mar 15, 2011 11:12 pm

Header colectors hit the driveline. :roll:
Doug
1967 f100 4x4
1970 f250 4x4


Return to “Archives”

Who is online

Users browsing this forum: No registered users