What's a Good Cheap Mask?

Moderator: FORDification

Post Reply
User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1882
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

What's a Good Cheap Mask?

Post by colnago »

I am planning on painting the engine compartment while I have the engine out. I haven't decided yet if I'm using paint bombs or a compressor and paint guns, but the whole thing got me wondering about my safety. What recommendations do people have for air masks?

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
cep62
100% FORDified!
100% FORDified!
Posts: 2035
Joined: Sun Oct 26, 2008 8:06 pm
Location: West Michigan

Re: What's a Good Cheap Mask?

Post by cep62 »

3M and Gerson ( sp?) make a good mask that cost about the same as the cartridges of more expensive masks.

if you're just using spray bombs you could get by with a good disposable type.(not the real thin paper style) but 3M has some with two elastic straps
that work good.
they come in a box of 20 or maybe a 5 pack.
Lone Ranger
Blue Oval Fan
Blue Oval Fan
Posts: 663
Joined: Tue Jun 21, 2016 2:27 pm
Location: Northern Michigan

Re: What's a Good Cheap Mask?

Post by Lone Ranger »

I've tied t shirts around my head for cheap before :lol: Bought a 3m mask for like 30$ and use it all the time.
1972 f100 4x4 4 inch lift with dump box kit-sold
1969 f250 4x4 highboy in progress.
http://www.fordification.com/forum/view ... 22&t=85251
Kyle
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: What's a Good Cheap Mask?

Post by basketcase0302 »

Joseph,

I have a very nice 3M respirator with new cartridges for sale if your still looking for one.

Jeff
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
lamogo33
New Member
New Member
Posts: 55
Joined: Fri Apr 28, 2017 5:52 pm

Re: What's a Good Cheap Mask?

Post by lamogo33 »

There is no such thing as a good cheap mask. Either it is good, or it is cheap. If you are painting outside in a well ventilated area you can get away with a single filter mask, otherwise get a double filter. I'd recommend 3M, they are always good.

The filters themselves will eventually get used up. The more air that passes through them the quicker they wear. Most 3M masks come with a ziplock airtight bag to keep the mask in, this is designed to extend the life of the filters. I normally use a Folgers coffee can to keep mine in. Also, the filters are replaceable. HTH.
1928 Model A Sedan
1952 Ford Tudor Sedan (Mainline)*
1992 Chevy K1500 ECSB w/a 454*


* = Daily Driver
Post Reply