Paint for Engine Heads

Moderator: FORDification

Post Reply
User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1882
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

Paint for Engine Heads

Post by colnago »

I just finished the rebuild of my 352. During the burn-in, the engine got a bit toasty. I painted the block/heads with VHT engine enamel, and the stock exhaust manifolds with Eastwood exhaust paint. During burn-in, the heads next to the manifolds got hot enough to burn the VHT paint off the heads. Now that the burn-in is done, can I repaint the heads with the VHT, or will they still get too hot during the normal driving that I need something else?

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: Paint for Engine Heads

Post by Ranchero50 »

Pointless unless you get blue exhaust paint (if it survived on the manifolds). Curse of the FE.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
User avatar
DuckRyder
Moderator
Moderator
Posts: 4893
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:

Re: Paint for Engine Heads

Post by DuckRyder »

POR15 engine paint stays on pretty well, but suspect it won’t work after the fact. It turns darker but so far is staying on...
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
Post Reply