Qa1 coil over shocks
Moderator: FORDification
-
- New Member
- Posts: 13
- Joined: Mon Jul 29, 2013 7:00 pm
Qa1 coil over shocks
I am doing a crown Vic swap and I saw that I think it was hackster (i could be wrong) did qa1 coilovers on a crown Vic swap I would like to run qa1 coilovers also my setup question is which qa1 coilovers to use and what spring rate for the coils any input would be helpful thanks
- HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: Qa1 coil over shocks
Why don't you post the question in his build thread? Or send him a private message?
http://www.fordification.com/forum/view ... &start=180
Eaton Detroit Spring offers lower/stiffer production springs as well as being able to produce a custom set: https://www.eatondetroitspring.com/
.
http://www.fordification.com/forum/view ... &start=180
Eaton Detroit Spring offers lower/stiffer production springs as well as being able to produce a custom set: https://www.eatondetroitspring.com/
.
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang