My work space

Discuss your workshop and related equipment

Moderator: FORDification

Post Reply
1guydude
Blue Oval Fan
Blue Oval Fan
Posts: 509
Joined: Tue Jan 31, 2017 4:20 pm

My work space

Post by 1guydude »

Well this fits about the front of the truck or the back. Just enough to keep me out of the rain here. Usually im in the driveway or out on the street.

Image
2008 bmw 528i
1967 ford f100
2014 vw tiguan
2016 kawasaki 250f
2015 KTM rc390
2014 audi tt Quatro s
Braaaaap!
1guydude
Blue Oval Fan
Blue Oval Fan
Posts: 509
Joined: Tue Jan 31, 2017 4:20 pm

Re: My work space

Post by 1guydude »

sorry about the mess! Ill get a shot of my toolbox and hand tools as well. Not much pwr or air tools. I know im boring!
-d
2008 bmw 528i
1967 ford f100
2014 vw tiguan
2016 kawasaki 250f
2015 KTM rc390
2014 audi tt Quatro s
Braaaaap!
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: My work space

Post by sargentrs »

Whatever gets the job done! I have a 2 car garage (no door) but my wife only allows me 1/2 of it. Not enough room but for my truck on my half. All my parts/tools are in the basement (crawlspace) and I have to lug everything up and back from around there.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
User avatar
Jacksdad
Blue Oval Fan
Blue Oval Fan
Posts: 579
Joined: Sat Mar 30, 2013 8:52 pm
Location: San Diego, CA

Re: My work space

Post by Jacksdad »

I have a 27'x10' garage with a workshop below my apartment - but it's so full of "stuff" that I can't get in without climbing over things. I built shelves everywhere I could put them, and I've begun moving things out in the past few weeks (our local thrift store is loving me), but it's going to take a while to get it cleared out. Although I couldn't fit my bump in there even with the camper box finally removed, at least I'll have a covered space to build the stake bed once I downsize. It's big enough for some of my other projects too - I got my kid a '68 Baja Bug as a graduation present, and it's a driver but needs a lot of fabrication, welding, and ultimately a paint job to get it looking good.
Actually, I should be down there now... :wink:
1971 DRW F350 cab and chassis with an Open Road motorhome conversion, Dana 70, 352 (originally 390)/C6, PS, power front discs, and 159" w/b.
1guydude
Blue Oval Fan
Blue Oval Fan
Posts: 509
Joined: Tue Jan 31, 2017 4:20 pm

Re: My work space

Post by 1guydude »

@sargants thats work just to do work on ur truck!
Jacksdad. U should take ur truck to the dump or have yard sales. Thats a big garage! Wish i had something like that. Sweet project too. Get on that bug!

Heres more of my mess and tools. Lots of.cleaning and work to do if im gonna attempt paint here.
Image


Image
Mess from truck work. Im terrible about putting things away.


Image
One of the best things my dad has ever gotten me.
Had to get some beefeyer jack stands and jack for my truck.

Image
2008 bmw 528i
1967 ford f100
2014 vw tiguan
2016 kawasaki 250f
2015 KTM rc390
2014 audi tt Quatro s
Braaaaap!
User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1882
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

Re: My work space

Post by colnago »

Actually, that's lots of work space! I do all of my work in the driveway or street. Makes it interesting to deal with any fluid when the wind is blowing! And in August, when it's 120 degrees out, my workspace is 120 degrees!

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
User avatar
Jacksdad
Blue Oval Fan
Blue Oval Fan
Posts: 579
Joined: Sat Mar 30, 2013 8:52 pm
Location: San Diego, CA

Re: My work space

Post by Jacksdad »

Actually, you're one up on me, 1guydude - you can move around in your garage.

When we moved in, the garage was painted brown (?) and had one light bulb. It was completely empty except for a "bench" made of 2x6 boards nailed to the wall. I painted the walls and ceiling white, put up some florescent light fittings, made a real bench, and built masses of shelves that get everything off the floor and against the walls (cheap plywood, screws and 2x4s make for some awesome shelves dirt cheap). I even hung some shelves from a ceiling beam. It's the biggest work space I've ever had, and it even has 110v and 220v outlets. Shame I can't get in there to work on anything :x


And this whale isn't exactly helping the situation either :o
You do not have the required permissions to view the files attached to this post.
1971 DRW F350 cab and chassis with an Open Road motorhome conversion, Dana 70, 352 (originally 390)/C6, PS, power front discs, and 159" w/b.
1guydude
Blue Oval Fan
Blue Oval Fan
Posts: 509
Joined: Tue Jan 31, 2017 4:20 pm

Re: My work space

Post by 1guydude »

I am lucky to have space i can move around in and pull the car in and out. Or truck in this case. Shoula seen it a month or so ago befor i got the truck. Was a mess. 700pds to the dump.
D
2008 bmw 528i
1967 ford f100
2014 vw tiguan
2016 kawasaki 250f
2015 KTM rc390
2014 audi tt Quatro s
Braaaaap!
1guydude
Blue Oval Fan
Blue Oval Fan
Posts: 509
Joined: Tue Jan 31, 2017 4:20 pm

Re: My work space

Post by 1guydude »

Anyone ever make there own paint booth? Thinking some painters plastic and 2x4s for structure will give me a lil add on to the inside garage painters plastic LOL.
too ghetto?
plan on upgrading my air compressor and getting a gun on CL maybe. Well most of my tools come from CL or pawn shops.
-d
2008 bmw 528i
1967 ford f100
2014 vw tiguan
2016 kawasaki 250f
2015 KTM rc390
2014 audi tt Quatro s
Braaaaap!
User avatar
Jacksdad
Blue Oval Fan
Blue Oval Fan
Posts: 579
Joined: Sat Mar 30, 2013 8:52 pm
Location: San Diego, CA

Re: My work space

Post by Jacksdad »

I have a couple of things that need painting, and I was thinking along the same lines - a wooden frame and plastic sheeting. I was toying with the idea of adding some venting as well, with filters to try and avoid the backlash from the immediate neighbors getting stoned on the fumes (ah - the joys of living in suburbia...) :D
1971 DRW F350 cab and chassis with an Open Road motorhome conversion, Dana 70, 352 (originally 390)/C6, PS, power front discs, and 159" w/b.
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: My work space

Post by sargentrs »

I built a paint booth for small parts in my basement workshop (page 3) https://m.fordification.com/forum/viewt ... 9&start=15. I also improvised a shelter to paint the bottom of my cab in the garage http://www.fordification.com/forum/view ... &start=270. That turned into a lot of work so after that I said to heck with it and just sprayed in the open garage or driveway and let the chips fall where they may! I'll get around to re-doing the inside of the garage eventually :lol:
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
Post Reply