Anyone have a picture

No tech discussion, please

Moderator: FORDification

Post Reply
fuzzier1
Preferred User
Preferred User
Posts: 266
Joined: Mon Dec 13, 2004 10:48 pm
Location: New Mexico

Anyone have a picture

Post by fuzzier1 »

Does anyone have a picture of the crossmember that goes below the transmission on a 2 wheel drive? Not the removable transmission crossmember but the riveted one right above the trailing arm frame brackets? A PO cut mine out and I need to build a new one but would like to see what stock one looks like. Thanks in advance.
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: Anyone have a picture

Post by sargentrs »

Here's a few that I have. Not sure it shows you enough to do what you need.
You do not have the required permissions to view the files attached to this post.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: Anyone have a picture

Post by sargentrs »

Couple more. Check the build thread in my signature and you might find some other shots that are useful. First 20 or so pages.
You do not have the required permissions to view the files attached to this post.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
fuzzier1
Preferred User
Preferred User
Posts: 266
Joined: Mon Dec 13, 2004 10:48 pm
Location: New Mexico

Re: Anyone have a picture

Post by fuzzier1 »

Thanks, I appreciate it
Zorm
Blue Oval Fan
Blue Oval Fan
Posts: 547
Joined: Tue Apr 14, 2009 1:28 pm
Location: Pensacola, Florida

Re: Anyone have a picture

Post by Zorm »

Dang, should have seen this last week, I just put mine back in after painting. Could have given measurements and stuff. :zz:
1971 F250 Camper Special, family owned since 1972
1983 Cherokee, last of the big ones, bought in Italy, family owned since 1998
1965 Corvair Corsa Convertible, 140 engine, 4 speed.

HE guides my path, forgives me when I stray and lights my life
fuzzier1
Preferred User
Preferred User
Posts: 266
Joined: Mon Dec 13, 2004 10:48 pm
Location: New Mexico

Re: Anyone have a picture

Post by fuzzier1 »

Thanks zorm, I think I have my plan from what Sargent posted. Thanks everyone.
fuzzier1
Preferred User
Preferred User
Posts: 266
Joined: Mon Dec 13, 2004 10:48 pm
Location: New Mexico

Re: Anyone have a picture

Post by fuzzier1 »

I have my plan to fix my frame but does anyone have a measurement from the top of the frame to the top of the crossmember? Also top of frame to bottom of crossmember? And finally how wide at the narrowest part of the it? Thanks in advance.

Fuzz
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: Anyone have a picture

Post by sargentrs »

Bottom of x/m to top of frame = 9-3/4".
Top of x/m top of frame = 7-1/2".
Inside Top narrowest part of x/m = 20-1/2"
Give or take 1/8". Bunch of crap under/around my truck but that's pretty darn close.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
fuzzier1
Preferred User
Preferred User
Posts: 266
Joined: Mon Dec 13, 2004 10:48 pm
Location: New Mexico

Re: Anyone have a picture

Post by fuzzier1 »

Thanks again Sargentrs I'm going to try starting on my crossmember over Thanksgiving.
User avatar
DuckRyder
Moderator
Moderator
Posts: 4924
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:

Re: Anyone have a picture

Post by DuckRyder »

You know they bolt in on FE/C6 trucks - so you could just go junk yarding ... :D
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
Ford-f100-1972
New Member
New Member
Posts: 27
Joined: Fri Mar 10, 2017 11:34 pm

Re: Anyone have a picture

Post by Ford-f100-1972 »

My '72 with a 302/C4 also bolts in. Just removed it for an aod swap.
fuzzier1
Preferred User
Preferred User
Posts: 266
Joined: Mon Dec 13, 2004 10:48 pm
Location: New Mexico

Re: Anyone have a picture

Post by fuzzier1 »

Mine was a 360 with C6 and the previous owner cut it out but the truck was pur together it looks like from a few trucks so... Plus I plan on taking the radius arm mounts off to clean up the frame (CV installed already). I could look around for one but I just figured i would make one.

Fuzz
fuzzier1
Preferred User
Preferred User
Posts: 266
Joined: Mon Dec 13, 2004 10:48 pm
Location: New Mexico

Re: Anyone have a picture

Post by fuzzier1 »

So I went looking for a crossmember that would unbolt today at a salvage yard and found one that unbolts on top but is riveted on the radius arm brackets. Also if you look at Sargentrs pictures his shows the same thing. They quoted me $75 with over half that in labor to get it. I'm going to check a couple more places tomorrow but I'm probably going to just make my own. Thanks anyway
Last edited by fuzzier1 on Sun Nov 26, 2017 4:33 pm, edited 1 time in total.
User avatar
magic bus
New Member
New Member
Posts: 85
Joined: Tue Jun 28, 2016 10:01 pm
Location: Gateway to the West

Re: Anyone have a picture

Post by magic bus »

Mine had a rivet on each side as well. Someone had removed them at some point and left the hole empty. I just put a bolt in it.
71 F100 2WD Longbed Sport Custom 390 C6
67 Econoline E100 200 I6 3 on the Tree
70 Mustang Coupe 302 C4

97 Expedition 4x4 Eddie Bauer
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: Anyone have a picture

Post by fordman »

Some were riveted in. Some had all bolts. I've got two of them. Can email or text pics. One of them still has all the bolts I put back in it.
Post Reply