PaPa's 69 F100 Explorer Coyote 10R80 swap
Moderator: FORDification
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
I decided to start with the passenger side first.
You do not have the required permissions to view the files attached to this post.
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
With the cab mount removed I decided to check the fit of the new mounts. These were purchased from AMD. I am not sure but I believe they are made by Dynacorn.
You do not have the required permissions to view the files attached to this post.
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
I cut out the center floor support and the floor pan.
You do not have the required permissions to view the files attached to this post.
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
I got a little out of order so I will go back one step and show where the cab support meets the rocker. This is another rust prone area.
You do not have the required permissions to view the files attached to this post.
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
After cutting out this section I test fit the floor support. Going take some work here.
You do not have the required permissions to view the files attached to this post.
Last edited by Venomous duck on Wed Feb 07, 2024 6:06 pm, edited 2 times in total.
-
DuckRyder
- Moderator
- Posts: 4893
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
nice work!
Following along.
Following along.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
After cutting out the bad section I drilled out all the spot welds on the rocker forward of the cut section. With the rocker removed I was able to access the kick panel.
You do not have the required permissions to view the files attached to this post.
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
After a little trial and error I got a pretty decent fit.
You do not have the required permissions to view the files attached to this post.
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
After the kick panel finished I welded in the rocker back in place.
You do not have the required permissions to view the files attached to this post.
-
hfdco4
- Blue Oval Guru
- Posts: 1289
- Joined: Mon Apr 01, 2013 1:45 pm
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
Great work.
Paul
FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
FE390PC1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
Thanks Paul. Robert, I missed your earlier post. I appreciate when someone takes time for words of encouragement. I will be taking some vacation time next week so I should make some progress.
-
jzjames
- 100% FORDified!
- Posts: 1765
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
You are right, that is a great post. I'm glad mine is not that bad. He did a really nice job.
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
After I got the rocker repaired it was time to move on to the cab support.
You do not have the required permissions to view the files attached to this post.
Last edited by Venomous duck on Sun Feb 11, 2024 10:10 pm, edited 1 time in total.
-
Venomous duck
- Preferred User
- Posts: 268
- Joined: Fri Jun 22, 2018 6:39 am
- Location: Norman, Oklahoma
- Contact:
Re: PaPa's 69 F100 Explorer Coyote 10R80 swap
Next I cut it to the proper length to see how it fits.
You do not have the required permissions to view the files attached to this post.