1967 F100 9"
Moderators: FORDification, 70_F100
-
greyscar
- New Member
- Posts: 12
- Joined: Fri Feb 28, 2014 7:40 pm
1967 F100 9"
Does anyone have the Perch Width Handy, Welding on New Perch's after a Year off the F100 work, and lost my note's on Old Axle. Pin Hole to Pin Center, And Thanks.
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 1967 F100 9"
Too early I guess, (I haven't finished my coffee LOL).="greyscar"]Does anyone have the Perch Width Handy, Welding on New Perch's after a Year off the F100 work, and lost my note's on Old Axle. Pin Hole to Pin Center, And Thanks.
Maybe try to goggle "Fordification builders' layout" (that's what I remember the spec sheet called that gives all those dimensions-as I can't seem to find it here anymore but sure it's here.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4