CVF Racing Pully vbelts

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
User avatar
jgf100
New Member
New Member
Posts: 63
Joined: Wed Nov 15, 2017 2:01 pm
Location: Greenville, SC

CVF Racing Pully vbelts

Post by jgf100 »

I recently ordered v-belt pulley system for my 1970 f100 302. Didn't realize it doesn't come with belts. Reached out to customer support and they directed to gates belts site. In order to get correct belts I need the length, top width and angle. Has anyone installed this pulley system and know what belts I need? Thanks!
'70 F100, 302 C4
Top
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: CVF Racing Pully vbelts

Post by basketcase0302 »

=jgf100
I recently ordered v-belt pulley system for my 1970 f100 302. Didn't realize it doesn't come with belts. Reached out to customer support and they directed to gates belts site. In order to get correct belts I need the length, top width and angle. Has anyone installed this pulley system and know what belts I need? Thanks!
Have never dealt with that pulley system but can help you in another tried and true way.

Get yourself an 8' long piece of 1/2" rope. Run the rope around each belt circumference and mark it with a sharpee or tape.
Measure your overall length and take that to any REPUTABLE (prob not big box) auto parts store like NAPA and tell them that is your overall length you need. :wink:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
Top
Post Reply

Return to “Engine”