Article 1975 - Bent Horn Ring Contact Plates

TSB #125 - October 24, 1969
(All 1969 Passenger Cars with Horn Blowing Ring)


A bent horn ring contact plate may cause the horn to be self-activated. This is most likely to occur when the vehicle has been left to stand for a prolonged period of time in temperatures of 85°F and above.

Using needle nose pliers bend the horn ring contact plate to provide for .020" to .040" gap at the contact points.

WARRANTY STATUS: Reimbursable within the provisions of the Warranty & Policy Manual.
Operation: SP-13808-A-69
Time: 0.2 Hr.

DLR. CODING: Basic Part No. 13A808 - Code No. 02

cron