Article 2089 - Differential Lock-Out Inoperative

TSB #132 - January 30, 1970
(LT & LNT Trucks with Air Operated Differential Lock-Out - 1970 Model)


On units built prior to January 8, 1970, measure the differential lock-out hose length from the frame side rail to the lock-out valve. This hose should be at least 29lA' long. If necessary, remove the existing hose and disassemble the reusable fittings from the hose. Cut a new piece of hose 29-1/4" long from service hose C9TZ-2269-B (No. 6 Aeroquip or equivalent) and install the fittings. Reinstall the hose on the vehicle.

PARTS:
Part NumberPart NameQty.ClassAvail.
C9TZ-2269-BHoseA/RBOK


PRODUCTION CORRECTION: January 8, 1970.
WARRANTY STATUS: Reimbursable within the provisions of the Warranty & Policy Manual.
Time: Actual time as defined in the Warranty & Policy Manual, Introduction Section, page 5.

DLR. CODING: Basic Part No. 2269 - Code No. 90

cron