Article 11 - Poor A/C Performance - Fresh Air Damper Sticking in Open Position

TSB #1 - September 15, 1971
(Ford - 1971)


CONDITION:
Poor A/C performance under recirculating or Max A/C operating conditions.

CAUSE:
The fresh air damper located in the air inlet cowl may hang-up in the open position.

CORRECTION:
A. Remove the cowl air inlet screen.
B. Set the A/C controls for MAX A/C (High Auto-65° for ATC) engine operating, and inspect the damper door. If the damper door is not closed, perform the following:
    1. Force the damper door past the metal stop to the closed position. (See Fig. 9).
    2. Obtain a piece of rubber vacuum hose, 1/4" I.D. -1-1/4" long.
    3. Insert the vacuum hose over the metal stop. (See Fig. 9.)
    4. Check door to ensure proper operation. C. Install the cowl air inlet screen.

Image

WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
Operation: SP-17508-A-71
Time: 0.3 hr.

DLR. CODING: Basic Part No. 17508 Code 41

cron